|
This
foam splash guard protects the sensor from strong
winds,
wind-driven rain, and water wash downs.
The splash guard is easy to
take off, clean and put on the sensor.
Its construction and color (bright red) make
it easy to identify sensors in the
field.
The splash guard acts as
an effective filter for large particles
and prevents sudden severe winds
from causing false alarms.
361-707-01 This splash guard works in
conjunction with dust filters on combustible or toxic gas
sensors such as the Delphian
CommonSensor.
It fits sensors made by most gas sensor manufacturers.
361-707-02 This splash guard has been especially designed for the
longer Delphian infrared
Determinator and
Remediator sensors.
|
RED FOAM GUARD
PROTECTS SENSOR FROM SPLASH, SPRAY, MISTS AND DUST
Exposure to
excessive moisture can damage gas sensors:
-
moisture can
block the flame arrestor
-
moisture can
combine with corrosive gases to attack sensor chemically
-
moisture can
combine with ambient dust to plug up flame arrestors and render sensors
useless
EASY
TO USE
Push or
twist on - no threads. Easy to remove for calibration. Can be easily cleaned
by rinsing in water.
The red splash guard makes your gas sensor easy to find.
MINIMAL
DIFFUSION
Conventional baffle type splash guards can make sensor response very
slow.
This reticulated foam splash guard has thousands of diffusion paths to
allow quick sensing of the gas while eliminating water penetration.
REUSABLE
Although economical to replace, the foam type splash guard can be washed
and rinsed in water.
NOTE: The foam can be dissolved by prolonged exposure to: acetone,
toluene, butyl alcohol, 1,2-dichloroethane.
|
(click image to view pdf file) |
See CHC Sensors
|
See Sensors for Toxic Gases
Copyright ©2023 Delphian Corporation
,
Northvale, N.J., U.S.A.
|